B2B technical product support for surface preparation, finishing, painting and waterproofing
Product Finder0Enquiry List
Application guide

Floor Protection During Painting

Select and install temporary coverings without damaging cured tile, wood, laminate or stone surfaces.

Before choosing a product

Understand the complete application route

Select and install temporary coverings without damaging cured tile, wood, laminate or stone surfaces.

Site conditions matterUse this page as a selection guide. Review site conditions and current product instructions before application.

Project input for quantity guidance

Record the approximate area and planned coats, then apply the current product-specific coverage rate with allowance for texture and application loss.

Enter project details to create an estimation note.
Recommended sequence

A practical step-by-step approach

1
Identify the exact floor finish.

Confirm the correct material and process before proceeding.

2
Clean and dry the surface.

Confirm the correct material and process before proceeding.

3
Test tape adhesion in a hidden area.

Confirm the correct material and process before proceeding.

4
Cover traffic routes and seal vulnerable edges.

Confirm the correct material and process before proceeding.

5
Inspect regularly and remove within the recommended period.

Confirm the correct material and process before proceeding.

Related SunChem Lunaris products

Products to discuss for this application

Final selection depends on the substrate, existing condition and complete system.

Build an enquiry list →
SunChem Lunaris Floor Protection Tape product photograph
Surface Protection Tapes

Floor Protection Tape

A temporary protection tape for suitable floor surfaces during painting, fitting and renovation work.

Suitable for
Compatible tile, stone, wood or laminate after testing
Primary use
Temporary floor protection
View product details →
SunChem Lunaris Roller Masker & Draper product photograph
Surface Protection Tapes

Roller Masker & Draper

A masking and draping accessory for covering larger areas during painting and renovation work.

Suitable for
Walls, furniture and project surfaces after compatibility testing
Primary use
Temporary project protection
View product details →
Illustration of Wood & Glass Protection Tape
Surface Protection Tapes

Wood & Glass Protection Tape

A temporary masking product for compatible wood and glass protection tasks.

Suitable for
Suitable wood finishes and glass after testing
Primary use
Masking and edge protection
View product details →

Need a project-specific recommendation?

Submit the surface type, current problem, project size, city and photographs.

Talk to a Product Specialist →
Practical guidance

Floor Protection During Painting FAQs

Can tape be left for the entire renovation?

Long dwell time can increase removal risk. Follow the product-specific maximum duration and inspect during the project.

Should tape be applied to grout?

Grout porosity and cure status affect adhesion and removal. Test before broad application.

How should tape be removed?

Remove slowly at a controlled angle and stop if the finish begins to lift or residue appears.