Spray Guns & Equipment
HVLP Gravity Feed Paint Spray Gun
A gravity-feed HVLP paint spray gun with separate air, fluid and fan controls for professional coating application.
SunChem Lunaris product category
Spray Guns & Equipment
Gravity-feed spray guns, air-line accessories and paint-preparation consumables.
Category overview
Choose by application, substrate and process stage
A spray setup must be matched to the coating, nozzle size, available air supply and desired finish. Correct adjustment, filtration and cleaning are as important as the gun itself.
Automotive refinishingFurniture and wood coatingsIndustrial coating workGeneral professional spray application
Need a product recommendation?
Share the surface, problem, approximate requirement and photographs for a more useful response.
Find the Right Product →Talk to a Product SpecialistTechnical selectionMatch the product to the surface, process and application method.
B2B requirementsShare product shortlist, quantity, city and timeline for project or repeat procurement.
Application guidanceReview the linked application and technical guide before final use.
Selection framework
How to approach this category
1
Check the coating manufacturer’s recommended nozzle range.
2
Confirm that the compressor can provide the required pressure and air volume.
3
Use clean, dry compressed air and appropriate filtration.
4
Choose separate equipment or thorough cleaning procedures for incompatible coatings.
Current catalogue
Open enquiry list →Spray Guns & Equipment products
Current formats and technical values should be confirmed for the intended requirement.
Spray Guns & Equipment
Water Separator with Adapter
An air-line accessory intended to help separate moisture close to a paint spray-gun connection.
Spray Guns & Equipment
Paint Funnel Filter
A disposable paint funnel filter for straining compatible coatings before spray application.
Spray Guns & Equipment
Texture Spray Gun
An air-powered texture application tool for compatible wall-texture and coating materials.
Trade and project requirements
Start B2B Enquiry →Need a category-level shortlist or repeat-supply discussion?
Send the relevant products, approximate quantity, city, PIN code and expected purchase timeline so the requirement can be routed correctly.
Related problem pages
Applications and selection guides
Practical guidance
Spray Guns & Equipment FAQs
What nozzle size should I choose?
The correct nozzle depends on coating viscosity, solids content and the finish required. Always begin with the coating supplier’s recommendation.
Why is air filtration important?
Moisture, oil and debris in compressed air can affect atomisation and contaminate the finish.
How often should a spray gun be cleaned?
Clean the fluid path promptly after use and before the coating cures. Do not soak components unless the manufacturer permits it.