Spray Guns & Equipment
Water Separator with Adapter
An air-line accessory intended to help separate moisture near the spray-gun connection.
Product photographs and detail crops are shown for identification. Confirm the current supplied version, packaging and nozzle option when enquiring.
Spray Guns & Equipment
HVLP Gravity Feed Paint Spray Gun
Professional spray application
A gravity-feed HVLP spray gun with independent air, fluid and fan controls for professional coating application.
Suitable contextNozzle sizes: 1.3, 1.4, 1.7, 2.0, 2.2 and 2.5 mm550 ml nylon gravity cup1 piece
Common applications
- Automotive refinishing
- Furniture and wood coating
- General professional painting
Product overview
Where this product fits
A gravity-feed HVLP spray gun with independent air, fluid and fan controls for professional coating application.
Selection and use checkpoints
- Select nozzle size by coating recommendation
- Use clean, dry compressed air
- Clean the fluid path immediately after use
Selection summary
HVLP Gravity Feed Paint Spray Gun is presented for professional spray application on automotive, wood, metal and other compatible coating work. Typical evaluation contexts on this page include Automotive refinishing, Furniture and wood coating, General professional painting. Before full use, select nozzle size by coating recommendation; use clean, dry compressed air; clean the fluid path immediately after use.
Important before use
Confirm substrate compatibility, clean the working area and follow the relevant coating or application instructions.
Confirm current technical dataUse the current product-specific document for specification, estimation, compatibility and safety decisions.
Product specifications
| Feed type | Gravity feed |
|---|---|
| Standard nozzle | 1.4 mm |
| Working pressure | 40–50 PSI |
| Pattern width | 200–280 mm |
| Air consumption | 7–12 CFM |
| Air inlet | 1/4 inch BSP |
| Cup capacity | 550 ml nylon |
| Needle | Stainless steel |
| Air cap | Brass |
| Approximate weight | About 700 g with cup |
| Country of origin | India |
Available formats
Nozzle sizes: 1.3, 1.4, 1.7, 2.0, 2.2 and 2.5 mm550 ml nylon gravity cup
Coverage and quantity
Choose the size or format to suit the application and equipment. Contact the team if you need help selecting the correct option.
Spray-equipment setup and test sequence
- Confirm the coating and nozzle requirement
Begin with the coating supplier’s stated viscosity, nozzle and air recommendations.
- Check the complete air path
Verify clean, dry compressed air, suitable hose and filtration before filling the gun.
- Test the spray pattern
Adjust air, fluid and fan controls on a test panel before coating the workpiece.
- Clean promptly after use
Follow the current equipment and coating instructions before material cures in the fluid path.
Technical documents
Downloads and supporting guides
Request the current controlled versionProduct data sheets, safety information and application guides may be updated. Confirm the applicable version for your product and use.
Practical guidance
HVLP Gravity Feed Paint Spray Gun FAQs
Where does HVLP Gravity Feed Paint Spray Gun fit in a product or application system?
It is presented for professional spray application on automotive, wood, metal and other compatible coating work. Review the related application page and current product document before final selection.
What information should I include when enquiring about HVLP Gravity Feed Paint Spray Gun?
Include the intended surface or process, approximate quantity, city and PIN code, application objective, timeline and photographs where they can help the technical review.
Build the complete system
View category →Related products
Spray Guns & Equipment
Paint Funnel Filter
A disposable or replaceable filter accessory for straining compatible coatings before filling spray equipment.