B2B technical product support for surface preparation, finishing, painting and waterproofing
Product Finder0Enquiry List
SunChem Lunaris Fiberglass Mesh product photograph

Product photograph shown for identification. Confirm current packaging, label details, size and supplied version when enquiring.

Waterproofing & Stone

Fiberglass Mesh

Reinforcement

A reinforcement mesh for specified waterproofing, plaster and crack-treatment systems.

Suitable context
50 GSM × 100 sq. m roll50 GSM × 50 sq. m roll

Common applications

  • Vulnerable junctions
  • Crack-treatment systems
  • Coating reinforcement
Check Delivery & AvailabilityTalk to a Specialist
Product overview

Where this product fits

A reinforcement mesh for specified waterproofing, plaster and crack-treatment systems.

Selection and use checkpoints

  • Use the specified mesh weight and overlap
  • Fully embed without wrinkles
  • Do not treat active structural movement as a coating-only issue

Selection summary

Fiberglass Reinforcement Mesh is presented for reinforcement on cementitious and compatible coating systems. Typical evaluation contexts on this page include Vulnerable junctions, Crack-treatment systems, Coating reinforcement. Before full use, use the specified mesh weight and overlap; fully embed without wrinkles; do not treat active structural movement as a coating-only issue.

Important before use

Confirm substrate compatibility, clean the working area and follow the relevant coating or application instructions.

Confirm current technical dataUse the current product-specific document for specification, estimation, compatibility and safety decisions.
Technical information

Product specifications

Suitable surfaceCementitious and compatible coating systems
Primary purposeReinforcement
Available formats50 GSM × 100 sq. m roll, 50 GSM × 50 sq. m roll
Technical detailsNot published on this page. Request the current product-specific technical sheet.
Country of originIndia

Available formats

Current sizes or formats available on enquiry

Coverage and quantity

Coverage or consumption depends on the surface, application method and required finish. Share the project area for quantity guidance.

Application route

Substrate preparation and system sequence

  1. Inspect the substrate and drainage

    Identify cracks, weak areas, contamination, ponding and previous coatings before selecting a system.

  2. Complete repairs first

    Repair cracks, joints and defects with compatible materials before the waterproofing stage.

  3. Follow the approved system sequence

    Use the current product documents for mixing, reinforcement, coat sequence and curing conditions.

  4. Protect and inspect the completed work

    Prevent premature traffic or water exposure and verify continuity before handover.

Technical documents

Downloads and supporting guides

Request the current controlled versionProduct data sheets, safety information and application guides may be updated. Confirm the applicable version for your product and use.

Related guides

How to Repair Cracks Before WaterproofingRead →How to Prepare a Terrace for WaterproofingRead →Request current technical documentRequest →
Practical guidance

Fiberglass Mesh FAQs

Where does Fiberglass Reinforcement Mesh fit in a product or application system?

It is presented for reinforcement on cementitious and compatible coating systems. Review the related application page and current product document before final selection.

What information should I include when enquiring about Fiberglass Reinforcement Mesh?

Include the intended surface or process, approximate quantity, city and PIN code, application objective, timeline and photographs where they can help the technical review.