B2B technical product support for surface preparation, finishing, painting and waterproofing
Buffing & Polishing Pads

Lamb’s Wool Polishing Pad

Correction and polishing

The Lamb's Wool Pad is a natural-fibre pad for applying compounds and waxes during correction and protection stages. The dense fibre structure distributes product evenly across the panel, which helps control swirl formation on automotive paint and marine finishes. It is suitable for rotary polishers and for hand application, and is commonly used with PTF Wax Protection. Select pad type according to correction stage, and confirm the result on a test area before working across a full surface.

Suitable context
7 inch1 piece

Common applications

  • Paint correction
  • General polishing
  • Workshop refinishing
Product overview

Where this product fits

The Lamb's Wool Pad is a natural-fibre pad for applying compounds and waxes during correction and protection stages. The dense fibre structure distributes product evenly across the panel, which helps control swirl formation on automotive paint and marine finishes.

Key benefits

  • Natural wool smooths surfaces gently and efficiently.
  • Dense fibers spread product evenly for a even look.
  • Holds up through repeated polishing sessions.
  • Works with rotary polishers or by hand with ease.
  • Dissipates heat to protect surfaces during extended use.

Selection and use checkpoints

  • Centre the pad before use
  • Keep the face clean and evenly loaded
  • Match with a suitable compound

Pro tip

After use, clean with a pad brush to maintain wool softness and extend pad life.

Technical information

Product specifications

Suitable surfaceAutomotive and compatible painted surfaces
Primary purposeCorrection and polishing
Available formats7 inch, 1 piece
Country of originIndia

Sizes & formats

Standard 7 inches (fits most rotary polishers)

Compatibility

Automotive paint, marine finishes, industrial surfaces

Purpose

Buffing and wax application

Application route

Pad selection and controlled-use sequence

  1. Match the pad to the process stage

    Select wool or foam density according to the required correction, refinement or finishing step.

  2. Inspect the pad before use

    Do not use a contaminated, damaged or misshapen pad on a finished surface.

  3. Use a controlled test area

    Confirm the pad, compound and machine combination before working across the full surface.

  4. Clean and replace as required

    Keep the working face free from excess residue and stop if the pad condition changes.

Practical guidance

Lamb’s Wool Polishing Pad FAQs

What makes Lunaris Lamb’s Wool Pad better than synthetic polishing pads?

Natural lamb’s wool provides superior heat dissipation, preventing surface damage while offering a gentler yet more effective buffing action. Unlike synthetic pads, it minimizes swirl marks and delivers a deep, high-gloss finish.

Can I use the lamb’s wool pad for both compounding and waxing?

Yes. This pad is suitable for both aggressive paint correction with compounds and smooth, even wax application. Use it with Lunaris LP-97 Rubbing Compound for defect removal, and follow with Lunaris PTF Wax Protection for gloss retention.

Is this pad safe for black or dark-colored cars?

Yes. The ultra-soft lamb’s wool fibers reduce the risk of micro-marring, making it suitable for darker paint finishes that tend to show imperfections more easily. Always use a clean pad to prevent dust or debris from causing scratches.

How do I clean and maintain my lamb’s wool pad?

After each use, clean the pad with a pad brush or compressed air to remove excess product. For deeper cleaning, wash with warm water and mild detergent, rinse thoroughly, and air dry. Proper maintenance extends the pad’s lifespan and gives consistent performance.

Can I use this pad with a dual-action polisher?

While primarily designed for rotary polishers, it can also be used with dual-action machines. However, keep in mind that wool pads tend to work more efficiently with rotary polishers for heavier correction work.