Wood Fillers & Stains
ECO-STUCCO Wood Filler
A wood-filling product for repairing suitable surface defects before sanding and finishing.
Application guide
Furniture Surface Preparation
Build a consistent sequence for defect repair, sanding, cleaning, staining and coating.
Before choosing a product
Understand the complete application route
Build a consistent sequence for defect repair, sanding, cleaning, staining and coating.
Site conditions matterUse this page as a selection guide. Review site conditions and current product instructions before application.
Recommended sequence
A practical step-by-step approach
1
Inspect wood condition and existing coating.
Confirm the correct material and process before proceeding.
2
Repair defects with a compatible filler.
Confirm the correct material and process before proceeding.
3
Sand through the appropriate grit sequence.
Confirm the correct material and process before proceeding.
4
Remove dust and test stain or coating on a sample.
Confirm the correct material and process before proceeding.
5
Apply the selected finish under controlled conditions.
Confirm the correct material and process before proceeding.
Related SunChem Lunaris products
Build an enquiry list →Products to discuss for this application
Final selection depends on the substrate, existing condition and complete system.
Wood Fillers & Stains
Wood Stain
A colouring product for compatible wood-preparation and finishing systems.
Paint Brushes
Fine Art Flat Brush
A flat-profile detail brush for broader controlled strokes and small decorative areas.
Spray Guns & Equipment
HVLP Gravity Feed Paint Spray Gun
A gravity-feed HVLP spray gun with independent air, fluid and fan controls for professional coating application.
Need a project-specific recommendation?
Submit the surface type, current problem, project size, city and photographs.
Practical guidance
Furniture Surface Preparation FAQs
Why does stain appear blotchy?
Uneven sanding, wood density, filler and absorption differences can create variation. Sample preparation is essential.
Should every defect be filled?
Natural features may be retained depending on design; unstable defects should be assessed before finishing.
Can spray and brush finishes use the same viscosity?
Application method may require different adjustment. Follow the coating supplier’s instructions.