Spray Guns & Equipment
HVLP Gravity Feed Paint Spray Gun
A gravity-feed HVLP spray gun with independent air, fluid and fan controls for professional coating application.
Application guide
Spray-Gun Nozzle Selection
Choose a nozzle and air setup according to coating viscosity, solids, finish and supplier recommendations.
Before choosing a product
Understand the complete application route
Choose a nozzle and air setup according to coating viscosity, solids, finish and supplier recommendations.
Site conditions matterUse this page as a selection guide. Review site conditions and current product instructions before application.
Recommended sequence
A practical step-by-step approach
1
Check the coating technical sheet.
Confirm the correct material and process before proceeding.
2
Select a nozzle within the recommended range.
Confirm the correct material and process before proceeding.
3
Confirm compressor pressure and air-volume capacity.
Confirm the correct material and process before proceeding.
4
Set fluid, fan and air controls on a test panel.
Confirm the correct material and process before proceeding.
5
Adjust only after evaluating atomisation and pattern.
Confirm the correct material and process before proceeding.
Related SunChem Lunaris products
Build an enquiry list →Products to discuss for this application
Final selection depends on the substrate, existing condition and complete system.
Spray Guns & Equipment
Water Separator with Adapter
An air-line accessory intended to help separate moisture near the spray-gun connection.
Spray Guns & Equipment
Paint Funnel Filter
A disposable or replaceable filter accessory for straining compatible coatings before filling spray equipment.
Need a project-specific recommendation?
Submit the surface type, current problem, project size, city and photographs.
Practical guidance
Spray-Gun Nozzle Selection FAQs
Is a larger nozzle always better for thicker paint?
A larger nozzle may be recommended for some higher-viscosity materials, but the coating data sheet should guide the choice.
What causes orange peel?
Viscosity, atomisation, distance, gun speed, overlap, temperature and coating flow can all contribute.
Why is my spray pattern uneven?
Check air cap cleanliness, nozzle condition, fluid delivery and fan adjustment before changing technique.