B2B technical product support for surface preparation, finishing, painting and waterproofing
Product Finder0Enquiry List
SunChem Lunaris AquaPro 1K Waterproof Coating product photograph
Waterproofing & Stone

AquaPro 1K Waterproof Coating

One-component waterproof coating route

Seal out water with Lunaris AquaPro 1K, a single-component waterproofing powerhouse for roofs, terraces, balconies, and wet zones like bathrooms. Formulated with an advanced anti-leaking agent, it creates a seamless, crack-resistant barrier that repels moisture, UV rays, and wear. Easy to apply and built to endure, it’s the choice for homeowners and contractors seeking lasting leak protection. Pair with Lunaris Paint Brush STAR for precise application.

Suitable context
1 L

Common applications

  • Terraces and roofs after proper preparation
  • Exterior and wet-area waterproofing details
  • Compatible waterproof-coating applications
Product overview

Where this product fits

Seal out water with Lunaris AquaPro 1K, a single-component waterproofing powerhouse for roofs, terraces, balconies, and wet zones like bathrooms.

Key benefits

  • Waterproof Seal: Creates a solid, leak-proof layer on any surface.
  • Anti-Leaking Agent: Strengthens the barrier to prevent seepage and water damage.
  • Multi-Area Use: Protects roofs, balconies, and indoor wet spaces.
  • Weather Resistance: Stands up to sun, rain, and temperature shifts.
  • Effortless Coating: Applies smoothly with brush or roller.
  • Crack Prevention: Flexible design resists structural stress.

Selection and use checkpoints

  • Assess cracks, drainage and old coatings before application
  • Use only on clean, stable and suitably prepared substrates
  • Use reinforcement at joints and details where the system requires it

Pro tip

Apply a second coat in high-exposure areas like roofs for extra protection.

Technical information

Product specifications

Suitable surfacePrepared concrete, plaster and compatible mineral surfaces
Primary purposeOne-component waterproof coating route
Available formats1 L
Country of originIndia

Sizes & formats

1 L

Compatibility

Roofs, terraces, wet areas

Purpose

Waterproofing

Application route

Substrate preparation and system sequence

  1. Inspect the substrate and drainage

    Identify cracks, weak areas, contamination, ponding and previous coatings before selecting a system.

  2. Complete repairs first

    Repair cracks, joints and defects with compatible materials before the waterproofing stage.

  3. Follow the approved system sequence

    Use the current product documents for mixing, reinforcement, coat sequence and curing conditions.

  4. Protect and inspect the completed work

    Prevent premature traffic or water exposure and verify continuity before handover.

Technical documents

Downloads and supporting guides

Related guides

How to Repair Cracks Before WaterproofingRead →How to Prepare a Terrace for WaterproofingRead →
Practical guidance

AquaPro 1K Waterproof Coating FAQs

Can Lunaris AquaPro be used on existing damp surfaces?

For best results, apply AquaPro on a dry, clean surface. If the surface is damp, let it dry completely before application to ensure proper adhesion and waterproofing.

How many coats of AquaPro are recommended?

We recommend applying at least two coats for optimal waterproofing, especially in areas exposed to heavy moisture or direct rainfall.

How long does AquaPro take to dry?

Drying time varies based on temperature and humidity, but it typically takes 4-6 hours for the first coat to dry. A full cure may take 24-48 hours.

Can it be applied over tiles or painted surfaces?

Yes, but for best adhesion, roughen smooth surfaces and clean them thoroughly before application. Using Lunaris L-16 Tile & Cera Cleaner beforehand ensures a clean base.

Is it suitable for drinking water tanks or swimming pools?

No, Lunaris AquaPro is not designed for potable water storage or submerged applications like pools. For such needs, a specialized waterproofing product is recommended.